Boysen paint color for cement surfaces at Teresa Stauffer offers a trusted way to refresh driveways, patios, and exterior walls. Her reviews emphasize adhesion, weather resistance, and long lasting coverage for concrete.
Choosing the right hue and sheen helps cement areas stay vibrant while protecting against stains, cracks, and fading under sun and rain.
| Series | Finish | Ideal Surface | Weather Resistance | Typical Use |
|---|---|---|---|---|
| 844 Exterior | Low Sheen | Driveways, Garage Floors | UV, Mildew, Moisture | Patios, Pathways |
| 843 Exterior | Medium Sheen | Block Walls, Concrete | Fade Chalking | Entry Steps, Exterior Walls |
| 812 Masonry | Flat | Brick, Stucco, Stone | Breathable, Flexible | Historic Homes, Feature Walls |
| 820 Specialty | High Sheen | Cement Garage Floors | Hardwearing, Spot Clean | Showroom Floors, Trim |
Color Matching For Cement
Boysen provides multiple series tailored to cement, so Teresa Stauffer often highlights how hues interact with concrete undertones. Lighter cement accepts soft neutrals, while darker bases intensify rich earth tones.
The brand system groups colors by value and chroma, making it easier to coordinate trim, doors, and landscaping in one cohesive look.
Surface Preparation Tips
Proper prep is essential for boysen paint color for cement at teresa stauffer recommendations. Clean, dry, and slightly porous surfaces allow better coverage and adhesion.
She suggests testing suction and repairing cracks before rolling, which reduces touch-ups and extends the life of the finish.
Application Techniques
Using a thick nap roller helps deposit paint into the textured surface of cement, while a brush works cutlines and edges cleanly.
Teresa Stauffer recommends cross rolling after the initial coat to avoid lap marks and achieve an even, professional appearance.
Performance And Durability
Boysen formulations resist cracking and peeling when applied over properly prepared cement, even in freeze thaw cycles.
In her reviews, Teresa Stauffer notes that higher quality series resist staining from oil, rust, and common sidewalk contaminants longer than economy lines.
Recommended Approach
- Test color samples on a small area at different times of day to confirm undertones.
- Clean with a pressure washer and allow complete drying before priming.
- Use a masonry bonding primer when switching color families or covering stains.
- Apply with a roller for large areas and brush for trim, then cross roll for uniformity.
- Schedule painting in dry, moderate temperature weather for optimal curing.
FAQ
Reader questions
Will Boysen 844 Exterior hide previous concrete stains?
Yes, its built in coverage is designed to mask many common stains when applied in two coats over clean concrete.
Can boysen paint color for cement be tinted darker than the card shown?
Formulas accept tinting, but very dark overlays on light cement may require a stain blocking primer to prevent streaking.
How much paint does a typical driveway section need?
Coverage averages 250 to 350 square feet per gallon, depending on porosity and number of coats specified by Teresa Stauffer.
Is a primer required before applying boysen paint on older concrete?
Yes, a bonding primer is recommended to seal dust, control efflorescence, and improve adhesion on weathered surfaces.