Installing a tail tidy on your Honda Click 125i helps create a cleaner look and keeps the rear mudguard aligned with the body.
This guide provides a detailed, step by step procedure so you can complete the installation safely and correctly on the first try.
| Component | Material | Purpose | Notes |
|---|---|---|---|
| Tail tidy panel | ABS plastic | Covers rear mudguard edges for a cleaner line | Pre painted to match Honda body color |
| Mounting brackets | Reinforced polymer | Secure the tail tidy to existing mounting points | Includes rubber washers for vibration damping |
| Hardware kit | Stainless steel bolts and nylon nuts | Used to attach brackets and panel | Color coded for easy sorting during installation |
| Installation instructions | Printed guide plus digital reference | Step by step visual guidance | Recommended to review before starting work |
Preparing For Tail Tidy Installation
Tools And Workspace Checklist
Gather the right tools and choose a clean, flat area to work so that the process remains efficient and safe.
Having everything nearby reduces interruptions and lowers the risk of scratching the Honda Click 125i body.
Recommended tools include a socket set, Allen keys, trim removal tools, microfiber towels, and a small container for bolts.
Inspecting The Tail Tidy And Brackets
Before starting, check the tail tidy panel for any visible damage or cosmetic defects from transport.
Verify that the mounting brackets and hardware match the Honda Click 125i model year to avoid fitment issues later.
Removing The Original Rear Body Parts
Accessing The Rear Fender Area
Start with the engine off and the parking brake engaged to prevent any accidental movement during the procedure.
Remove the rear seat carefully, followed by the side cover and tail light assembly if they obstruct access to the mudguard.
Detaching Old Mounting Components
Take photos of the existing mounting configuration so you can reference the correct alignment when installing the tail tidy.
Loosen the bolts holding the original mudguard trim and brackets, then gently lift them away while supporting the surrounding panels.
Installing The Tail Tidy Panel
Aligning The Tail Tidy Correctly
Position the tail tidy panel so that its edges line up smoothly with the rear fender and side body panels.
Check that the license plate mounting holes and reflector cutouts are properly oriented before proceeding to secure the panel.
Securing The Brackets And Hardware
Insert the mounting brackets into the predefined slots on the tail tidy and tighten the bolts gradually in a cross pattern.
Use the provided rubber washers to absorb vibrations and ensure the panel stays silent and secure over time.
Final Recommendations For Tail Tidy Use
- Verify all bolts are tightened to the recommended torque to avoid rattling at higher speeds.
- Reinstall the side cover and seat in the reverse order to ensure proper alignment and sealing.
- Check the alignment of the tail tidy after riding on uneven roads to confirm it has not shifted.
- Keep the mounting points lubricated lightly with approved silicone products to prevent corrosion.
- Store the original rear trim in a safe place in case you need to revert to the factory setup later.
FAQ
Reader questions
Can I install the tail tidy myself without professional help?
Yes, most riders with basic tool skills can complete the installation in under an hour by following the step by step procedure carefully.
Will installing a tail tidy affect the rear suspension or braking system on Honda Click 125i?
No, the tail tidy only attaches to body mounts and does not interfere with suspension components or brake lines when installed correctly.
Do I need to drill new holes or modify the tail tidy for a proper fit?
Honda designed the Click 125i to use existing mounting points, so you should not need to drill or modify the tail tidy panel during installation.
How do I clean and maintain the tail tidy after installation?
Use a soft cloth, mild soap, and water to clean the panel, avoiding abrasive cleaners that could scratch the pre painted surface over time.