The Panduit LAN-TY5E-6A is a keystone jack engineered for demanding commercial installations that require consistent Gigabit Ethernet performance. This modular patch panel component supports PoE applications and is designed to integrate cleanly into structured wiring systems.
Below is a detailed overview of specifications, performance categories, and deployment considerations for this data connectivity solution.
| Model | Panduit LAN-TY5E-6A | Category | Performance |
|---|---|---|---|
| Standard | Compliant | Category 5e | 100 MHz |
| Data Rate | Up to 1 Gbps | Channel Configuration | 4 pairs, 8P8C |
| Insertion Loss | Typical < 0.3 dB | Backward Compatibility | Cat 5, Cat 3 |
| Shielding | Unshielded (U/UTP) | Compatible Couplers | Panduit TY5E series |
Panduit LAN Performance Specifications
Transmission Characteristics
This keystone jack maintains strict insertion loss limits across the Cat 5e frequency range to support reliable Gigabit links. Its 8P8C connector layout ensures each pair operates within defined return loss and crosstalk parameters.
Physical Compatibility
The Panduit LAN-TY5E-6A is designed for snap-in or screw-down installations in modular faceplates and patch panels. Confirm that your enclosure supports the 5e category wiring standard before deployment.
Installation Best Practices
Termination and Testing
Use a certified crimping tool and T568A or T568B wiring schemes to terminate this jack. After installation, verify performance with a Cat 5e certified test kit to validate channel length and signal integrity.
Cable Management
Maintain bend radius and avoid sharp bends near the connector to protect the transmission line. Secure cables with appropriate strain relief to reduce mechanical stress on the contact points.
Environmental and Compliance Details
Operating Conditions
Deployment in controlled environments with stable temperature and humidity helps preserve the long-term performance of this keystone jack. Avoid exposure to aggressive chemicals or excessive particulate contamination.
Certifications
The component complies with relevant industry standards including TIA/EIA-568 and ISO/IEC 11801 specifications. Check regional requirements for exact installation codes and grounding practices.
FAQ
What maximum data rate does this jack support in a live network?
It reliably supports Gigabit Ethernet up to 1 Gbps when used with Cat 5e patch cables and compliant hardware.
Can I use this component for PoE installations without special upgrades?
Yes, the Panduit LAN-TY5E-6A is compatible with Power over Ethernet applications up to the standard Category 5e power limits.
Is this keystone jack suitable for outdoor or riser-rated vertical runs?
It is primarily designed for indoor, horizontal structured wiring applications and does not include outdoor or riser-specific certifications.
What pair configuration is required for 10 Gigabit operation with this jack?
To achieve 10 Gbps, all four twisted pairs must be used with full 8P8C connectivity and Cat 5e or higher cabling meeting NEXT and attenuation targets.
Deployment Recommendations
- Verify patch panel and cable compatibility with Category 5e specifications.
- Document wiring schemes (T568A or T568B) for future maintenance.
- Perform certified testing after installation to confirm channel performance.
- Use shielded solutions only if your environment requires enhanced EMI protection.
- Plan cable routing to minimize bend radius violations near the connector.