The TECO 3 phase induction motor 2HP 6 poles 1140 rpm 100L frame for Ryowo is designed for reliable motion in demanding industrial setups. This motor combines standard frame compatibility with performance oriented windings to suit conveyors, pumps, and mixers.
Engineered for continuous duty, the motor delivers stable torque while maintaining compact installation dimensions. Users choosing this configuration gain a robust solution tuned for consistent production cycles.
| Model | Power | Speed | Frame |
|---|---|---|---|
| TECO 3 Phase Induction Motor | 2 HP | 1140 rpm | 100L |
| Phase | 3 Phase | Poles | 6 Poles |
| Application Target | Ryowo Compatibility | Mounting | Foot Mounted |
| Enclosure | TECO Standard | Cooling | IC411 |
Motor Design and Performance Characteristics
The TECO 3 phase induction motor 2HP 6 poles 1140 rpm 100L frame integrates balanced magnetic circuits to reduce losses. Stator windings are configured for smooth harmonic suppression, improving efficiency across the operating range.
Compatibility with Ryowo Machinery
Ryowo machinery often requires compact drive units with predictable behavior. The 100L frame footprint allows direct mounting alongside other control panels, minimizing layout changes.
Shaft alignment options and standardized mounting holes simplify integration, reducing commissioning time on production lines. Users benefit from drop in replacement capability when upgrading older equipment.
Electrical and Mechanical Specifications
Voltage and frequency matching is critical for stable torque delivery. The motor is optimized for line connected operation at nominal conditions.
| Parameter | Value | Test Condition |
|---|---|---|
| Power | 2 HP | Output at rated load |
| Speed | 1140 rpm | No load |
| Frame Size | 100L | International standard |
| Poles | 6 | Synchronous speed basis |
| Phase | 3 Phase | Balanced supply |
| Insulation Class | Class F | Thermal protection |
Installation and Maintenance Guidelines
Proper grounding and vibration damping improve reliability. Alignment checks during commissioning prevent uneven bearing wear.
Routine inspection intervals should include temperature monitoring and lubrication schedules for applicable accessories. Clean air intake paths help maintain designed thermal performance over long cycles.
Key Takeaways for Buyers
- Check voltage and frequency compatibility with local supply before installation.
- Verify shaft and coupling dimensions against existing machinery for a seamless retrofit.
- Plan maintenance intervals based on duty cycle and ambient conditions.
- Consider enclosure options if operating in dusty or humid environments.
- Review efficiency ratings to align with energy cost targets.
FAQ
Reader questions
Is this motor suitable for continuous duty in a Ryowo packaging line
Yes, the TECO 3 phase induction motor 2HP 6 poles 1140 rpm 100L frame is rated for continuous duty and is compatible with Ryowo packaging equipment, provided load and environmental conditions match specifications.
What is the typical efficiency at full load for this motor
Efficiency depends on voltage and cooling, but the motor is designed to meet or exceed IE2 efficiency levels at rated load, reducing operating costs over time.
Can the shaft diameter be customized for existing couplings
Standard shaft dimensions are specified for the 100L frame, and customization options are available based on order requirements to match existing couplings.
What ambient temperature range is acceptable for this motor
The motor is rated for standard industrial ambient ranges, and derating may be required above the upper limit for continuous operation.