vfpc8wss5 100mm is a precision-engineered component designed for demanding mechanical and optical assemblies. This compact 100 millimeter profile combines durability, alignment accuracy, and modular mounting options, making it popular in instrumentation and automated equipment.
Engineers and technicians rely on vfpc8wss5 100mm to maintain consistent spacing, reduce vibration, and support sensitive modules. The following sections explore specifications, mounting configurations, and practical use cases to help you determine whether this component fits your application.
| Parameter | Value | Unit | Notes |
|---|---|---|---|
| Length | 100 | mm | Overall active travel or mounting length |
| Material | Anodized aluminum alloy | - | Lightweight with corrosion resistance |
| Load capacity | 150 | N | Axial static load limit |
| Mounting interface | M6 | - | Threaded holes for panel integration |
| Precision | ±0.05 | mm | Positional repeatability |
| Operating temperature | -20 | to 60 | Range in Celsius |
| Surface finish | Type III anodizing | - | Hard coat for wear resistance |
| Compliance | CE, RoHS | - | European safety and hazardous substance directives |
Mechanical Design of vfpc8wss5 100mm
The mechanical architecture of vfpc8wss5 100mm balances compact size with robust load paths. Side-entry fasteners and a low-profile frame minimize installation depth while maintaining stiffness in multi-axis systems.
Hardened guide rails and precision-ground shafts reduce runout during high-speed scanning or repeated cycling. Integrated cable channels keep wiring organized and protect against abrasion in dynamic environments.
Mounting and Integration Options
Flexible vfpc8wss5 100mm mounting options allow direct panel attachment, standoff fixation, or integration into subframes. The standardized M6 interface simplifies compatibility with existing mechanical layouts.
Back-compatibility with legacy brackets enables drop-in upgrades in many bench instruments. Alignment indicators and dowel pins further streamline assembly, reducing setup time for production teams.
Performance Specifications and Environmental Limits
Under rated load, vfpc8wss5 100mm maintains dimensional stability and repeatable positioning across temperature swings. Thermal expansion coefficients are matched to adjacent structural elements to limit stress accumulation.
Dust resistance and optional seals make the component suitable for light industrial environments. Vibration testing confirms performance under moderate shock loads typical of automated test setups.
vfpc8wss5 100mm in Optical and Test Equipment
In optical benches and laser alignment systems, vfpc8wss5 100mm serves as a stable translation stage. Its fine-pitch adjustments enable micron-level beam steering and on-axis imaging control.
Telecommunications test fixtures leverage the 100 millimeter spacing to calibrate S-parameter analyzers and vector network modules. The predictable mechanical behavior helps maintain calibration over extended production runs.
Key Takeaways for vfpc8wss5 100mm Deployment
- Verify that the 100 mm travel or spacing matches your mechanical layout before integration.
- Use M6 mounting hardware and follow torque specs to maintain the specified ±0.05 mm precision.
- Apply optional environmental seals when operating in high dust or humidity conditions.
- Leverage built-in cable channels to protect wiring and minimize snag risks in dynamic setups.
- Schedule periodic calibration checks to ensure repeatability over the product lifecycle.
FAQ
Reader questions
What types of equipment commonly use vfpc8wss5 100mm?
vfpc8wss5 100mm is commonly used in optical benches, automated test equipment, laser alignment systems, and precision instrumentation that require stable 100 millimeter spacing and repeatable positioning.
Can vfpc8wss5 100mm handle shock or vibration in industrial settings?
Yes, vfpc8wss5 100mm is tested for moderate shock and vibration, making it suitable for many industrial environments; however, extreme conditions may require additional isolation or mechanical support.
Is vfpc8wss5 100mm compatible with standard mounting patterns?
vfpc8wss5 100mm typically uses M6 threaded holes and aligns with common hole patterns, enabling direct integration into many commercial and prototype fixtures.
What maintenance is required to keep vfpc8wss5 100mm operating accurately?
Routine cleaning, periodic inspection of fasteners, and occasional lubrication of moving rails as recommended by the manufacturer are sufficient to preserve long-term accuracy.